iOS 7 beta 5, iata intregul changelog

  iOS 7 beta 5 a fost lansat in cursul acestei seri de catre compania Apple, iar acum avem disponibil intregul changelog al acestei versiuni a sistemului de operare. Desigur ca in el regasim, in principal, reaolvari ale problemelor anterioare si imbunatatiri ale performantelor, insa designerii companiei au continuat sa implementeze diverse subtile modificari ale UI-ului.

Notes and Known Issues

The following issues relate to using iOS SDK 7.0 to develop code.Address Book

Notes

The classes in the AddressBookUI framework now explicitly disallow subclassing. For apps linked against the iOS 7 SDK, attempting to initialize a subclass of one of these classes returns nil. For apps linked against older SDKs, the only behavior change is a warning logged to the console.

As of Seed 4, privacy support for the AddressBookUI framework is reenabled for apps linked against the iOS 7 SDK. Apps linked against older SDKs are not changed. If your app uses any of the Address Book view controllers, you should verify that it still behaves as expected.

AirDrop

Notes

AirDrop in iOS 7 Seed 2 or later is not compatible with AirDrop in iOS 7 Seed 1.

Contacts Only support requires that:

You are logged in to iCloud.

The sender and receiver have each other’s Apple ID email addresses in Contacts on their devices.

Fixed in Seed 5

Contact Only currently requires that you have an active Internet connection.

The App Store should support the ability to find an app capable of opening a received document based on the document’s Uniform Type Identifier (UTI). Currently, just a blank screen is displayed.

AV Foundation

Notes

AVCaptureSession now uses your app’s AVAudioSession by default.

Core Animation

Notes

When the UIViewGroupOpacity key is not present, the default value is now YES. The default was previously NO.

This means that subviews of a transparent view will first be composited onto that transparent view, then the precomposited subtree will be drawn as a whole onto the background. A NO setting results in less expensive, but also less accurate, compositing: each view in the transparent subtree is composited onto what’s underneath it, according to the parent’s opacity, in the normal painter’s algorithm order.Exchange

Notes

In Seed 4 and later, the Exchange DeviceIdentifier has been changed back to the behavior of iOS 6 where it uses the serial number.

Fonts

Notes

New font line heights were introduced in Seed 4. If you had manually aligned your font in earlier seeds, it may move slightly up vertically in later seeds.

Foundation

Notes

An NSMetadataQuery with ubiquitous scope can now use kMDItemContentTypeTree in predicates.

For example:

NSPredicate *p = [NSComparisonPredicate

predicateWithLeftExpression:[NSExpression

expressionForKeyPath:@”kMDItemContentTypeTree”]

rightExpression:[NSExpression

expressionForConstantValue:@”public.rtf”]

modifier: NSAnyPredicateModifier

type:NSLikePredicateOperatorType

options:0];

When called on results returned by queries with ubiquitous scopes, -[NSMetadataItem

valueForAttribute:NSMetadataItemDisplayNameKey] now produces the same value as –

[NSURL getResourceValue: forKey: NSURLLocalizedNameKey], matching nonubiquitous

queries.

iCloud

Notes

If you use iCloud Keychain with recovery, you may see a dialog indicating recovery has been disabled due to a server change. This is intentional. To reenable functionality, follow the instructions in the notification. If you see multiple alerts or observe issues with reenabling recovery, please file a bug report.

iCloud Keychain in iOS 7 Seed 3 or later is not backward compatible with iOS 7 Seed 2 or OS X

Mavericks Seed 2.

If you had iCloud Keychain and/or Keychain Restore enabled from iOS 7 Seed 2, both features are disabled upon updating to iOS 7 Seed 3 or later.

After updating to iOS 7 Seed 3 or later, go to Settings > iCloud > Keychain and reenable iCloudKeychain on your devices.

See OS X v10.9 Release Notes for more details.

Activation Lock, a new feature of Find My iPhone, is turned on automatically when Find My iPhone is enabled on any device running iOS 7. Activation Lock requires users to enter their Apple ID and password to turn of Find My iPhone, sign out of iCloud, erase the device, or reactivate the device after an erase. It’s important to do one of the following before transferring a device to a new user:

Sign out of iCloud.

Turn of Activation Lock in Settings > iCloud > Find My iPhone.

Fixed in Seed 5

Voice Memos are not restored from iCloud Backups.

Users in Switzerland, France, Spain, Germany, Poland, Finland, and possibly some other countries, will be unable to restore their keychains using phone number validation.

Known Issues

Password fields are not displayed in alert views for apps in landscape (for example, Game Center authentication or In-App purchase). Text entry still works, though you can’t see what you are typing.

MapKit

Notes

If the calls to renderInContext on the layer backing an MKMapView are made of the main thread, they should be eliminated or moved to the main thread. Failure to do so can cause an app crash.

Instead of using renderInContext, use the new MKMapSnapshotter APIs.

Media

Notes

iOS now remembers the last used media app across reboot and app crashes. Media apps that can receive remote control events should be prepared to be launched in the background and potentially receive a remote control event to begin playback. Additionally, it’s important that media apps monitorand handle the media server reset event, since the media app may receive a remote request to resume playback after a reset. Notifications to monitor these media server events are available in

AVAudioSession and proper handling is described in General recommendations for handling

kAudioSessionProperty_ServerDied.

Multipeer Connectivity

Notes

Many updates to the MCSession APIs are included in this seed. The APIs now function as they were presented at WWDC. Major changes and enhancements include:The following new method on MCSession has been implemented:

– (NSOutputStream *)startStreamWithName:(NSString *)streamName toPeer:(MCPeerID

*)peerID error:(NSError **)error

This delegate method has been implemented:

– (void)session:(MCSession *)session didReceiveStream:(NSInputStream *)stream

withName:(NSString *)streamName fromPeer:(MCPeerID *)peerID

The following new method on MCSession has been implemented:

– (NSProgress *)sendResourceAtURL:(NSURL *)resourceURL withName:(NSString

*)resourceName toPeer:(MCPeerID *)peerID withCompletionHandler:(void(^)(NSError

*error))completionHandler

The delegate method to start receiving a resource from remote peer has been implemented as:

– (void)session:(MCSession *)session didStartReceivingResourceWithName:(NSString

*)resourceName fromPeer:(MCPeerID *)peerID withProgress:(NSProgress *)progress

The delegate method to finish receiving a resource from remote peer and save the content in a

temporary location is implemented as:

– (void)session:(MCSession *)session didFinishReceivingResourceWithName:(NSString

*)resourceName fromPeer:(MCPeerID *)peerID atURL:(NSURL *)localURL withError:

(NSError *)error

Note: The app is responsible for moving the file to a permanent location within its sandbox.

MCAdvertiserAssistant is a convenience class for implementing an Advertiser, which handles invitations and connections to an MCSession.

MCSession has a new initWithPeer: method.

sendResource has added “with” to the completionHandler.

The timeout has been removed from connectPeer:withNearbyConnectionData.

For more information on these APIs, watch the video for WWDC 2013 Session 708, “Nearby

Networking with Multipeer Connectivity.”

Multitasking

Notes

AVAudioSession can no longer become active by apps in the background that wake due to

Background Fetch, Background Transfers, and Remote Notification events.

The policy for the task completion API has changed back to match the iOS 6 behavior, but the time limit for task completion has decreased from 10 minutes in iOS 6.

NetworkingNotes

The cellular fallback technology present in previous seeds has been removed as of Seed 5.

Two low-level networking APIs that used to return a MAC address now return the fixed value

02:00:00:00:00:00. The APIs in question are sysctl (NET_RT_IFLIST) and ioctl

(SIOCGIFCONF). Developers using the value of the MAC address should migrate to identifiers such

as -[UIDevice identifierForVendor]. This change afects all apps running on iOS 7.

Objective-C Runtime

Notes

Due to changes in how the isa field is implemented, *self may change during enumeration (for Apple just released iOS 7 beta 5 for the iPhone, iPad, iPad mini and iPod touch and now the full change log has been made available as well. The latest iOS 7 beta was released to developers as an over the air (OTA) update first, as is always the case, but we have been informed that the new operating system files are now available for download on Apple’s online developer portal. Along with them, Apple has also posted the complete iOS 7 beta 5 change log that includes a list of all of the software updates the company managed to pack into its latest beta OS. BGR has been sent a copy of Apple’s iOS 7 beta 5 change log, and all of the details follow below.

Notes and Known Issues

The following issues relate to using iOS SDK 7.0 to develop code.Address Book

Notes

The classes in the AddressBookUI framework now explicitly disallow subclassing. For apps linked against the iOS 7 SDK, attempting to initialize a subclass of one of these classes returns nil. For apps linked against older SDKs, the only behavior change is a warning logged to the console.

As of Seed 4, privacy support for the AddressBookUI framework is reenabled for apps linked against the iOS 7 SDK. Apps linked against older SDKs are not changed. If your app uses any of the Address Book view controllers, you should verify that it still behaves as expected.

AirDrop

Notes

AirDrop in iOS 7 Seed 2 or later is not compatible with AirDrop in iOS 7 Seed 1.

Contacts Only support requires that:

You are logged in to iCloud.

The sender and receiver have each other’s Apple ID email addresses in Contacts on their devices.

Fixed in Seed 5

Contact Only currently requires that you have an active Internet connection.

The App Store should support the ability to find an app capable of opening a received document based on the document’s Uniform Type Identifier (UTI). Currently, just a blank screen is displayed.

AV Foundation

Notes

AVCaptureSession now uses your app’s AVAudioSession by default.

Core Animation

Notes

When the UIViewGroupOpacity key is not present, the default value is now YES. The default was previously NO.

This means that subviews of a transparent view will first be composited onto that transparent view, then the precomposited subtree will be drawn as a whole onto the background. A NO setting results in less expensive, but also less accurate, compositing: each view in the transparent subtree is composited onto what’s underneath it, according to the parent’s opacity, in the normal painter’s algorithm order.Exchange

Notes

In Seed 4 and later, the Exchange DeviceIdentifier has been changed back to the behavior of iOS 6 where it uses the serial number.

Fonts

Notes

New font line heights were introduced in Seed 4. If you had manually aligned your font in earlier seeds, it may move slightly up vertically in later seeds.

Foundation

Notes

An NSMetadataQuery with ubiquitous scope can now use kMDItemContentTypeTree in predicates.

For example:

NSPredicate *p = [NSComparisonPredicate

predicateWithLeftExpression:[NSExpression

expressionForKeyPath:@”kMDItemContentTypeTree”]

rightExpression:[NSExpression

expressionForConstantValue:@”public.rtf”]

modifier: NSAnyPredicateModifier

type:NSLikePredicateOperatorType

options:0];

When called on results returned by queries with ubiquitous scopes, -[NSMetadataItem

valueForAttribute:NSMetadataItemDisplayNameKey] now produces the same value as –

[NSURL getResourceValue: forKey: NSURLLocalizedNameKey], matching nonubiquitous

queries.

iCloud

Notes

If you use iCloud Keychain with recovery, you may see a dialog indicating recovery has been disabled due to a server change. This is intentional. To reenable functionality, follow the instructions in the notification. If you see multiple alerts or observe issues with reenabling recovery, please file a bug report.

iCloud Keychain in iOS 7 Seed 3 or later is not backward compatible with iOS 7 Seed 2 or OS X

Mavericks Seed 2.

If you had iCloud Keychain and/or Keychain Restore enabled from iOS 7 Seed 2, both features are disabled upon updating to iOS 7 Seed 3 or later.

After updating to iOS 7 Seed 3 or later, go to Settings > iCloud > Keychain and reenable iCloudKeychain on your devices.

See OS X v10.9 Release Notes for more details.

Activation Lock, a new feature of Find My iPhone, is turned on automatically when Find My iPhone is enabled on any device running iOS 7. Activation Lock requires users to enter their Apple ID and password to turn of Find My iPhone, sign out of iCloud, erase the device, or reactivate the device after an erase. It’s important to do one of the following before transferring a device to a new user:

Sign out of iCloud.

Turn of Activation Lock in Settings > iCloud > Find My iPhone.

Fixed in Seed 5

Voice Memos are not restored from iCloud Backups.

Users in Switzerland, France, Spain, Germany, Poland, Finland, and possibly some other countries, will be unable to restore their keychains using phone number validation.

Known Issues

Password fields are not displayed in alert views for apps in landscape (for example, Game Center authentication or In-App purchase). Text entry still works, though you can’t see what you are typing.

MapKit

Notes

If the calls to renderInContext on the layer backing an MKMapView are made of the main thread, they should be eliminated or moved to the main thread. Failure to do so can cause an app crash.

Instead of using renderInContext, use the new MKMapSnapshotter APIs.

Media

Notes

iOS now remembers the last used media app across reboot and app crashes. Media apps that can receive remote control events should be prepared to be launched in the background and potentially receive a remote control event to begin playback. Additionally, it’s important that media apps monitorand handle the media server reset event, since the media app may receive a remote request to resume playback after a reset. Notifications to monitor these media server events are available in

AVAudioSession and proper handling is described in General recommendations for handling

kAudioSessionProperty_ServerDied.

Multipeer Connectivity

Notes

Many updates to the MCSession APIs are included in this seed. The APIs now function as they were presented at WWDC. Major changes and enhancements include:The following new method on MCSession has been implemented:

– (NSOutputStream *)startStreamWithName:(NSString *)streamName toPeer:(MCPeerID

*)peerID error:(NSError **)error

This delegate method has been implemented:

– (void)session:(MCSession *)session didReceiveStream:(NSInputStream *)stream

withName:(NSString *)streamName fromPeer:(MCPeerID *)peerID

The following new method on MCSession has been implemented:

– (NSProgress *)sendResourceAtURL:(NSURL *)resourceURL withName:(NSString

*)resourceName toPeer:(MCPeerID *)peerID withCompletionHandler:(void(^)(NSError

*error))completionHandler

The delegate method to start receiving a resource from remote peer has been implemented as:

– (void)session:(MCSession *)session didStartReceivingResourceWithName:(NSString

*)resourceName fromPeer:(MCPeerID *)peerID withProgress:(NSProgress *)progress

The delegate method to finish receiving a resource from remote peer and save the content in a

temporary location is implemented as:

– (void)session:(MCSession *)session didFinishReceivingResourceWithName:(NSString

*)resourceName fromPeer:(MCPeerID *)peerID atURL:(NSURL *)localURL withError:

(NSError *)error

Note: The app is responsible for moving the file to a permanent location within its sandbox.

MCAdvertiserAssistant is a convenience class for implementing an Advertiser, which handles invitations and connections to an MCSession.

MCSession has a new initWithPeer: method.

sendResource has added “with” to the completionHandler.

The timeout has been removed from connectPeer:withNearbyConnectionData.

For more information on these APIs, watch the video for WWDC 2013 Session 708, “Nearby

Networking with Multipeer Connectivity.”

Multitasking

Notes

AVAudioSession can no longer become active by apps in the background that wake due to

Background Fetch, Background Transfers, and Remote Notification events.

The policy for the task completion API has changed back to match the iOS 6 behavior, but the time limit for task completion has decreased from 10 minutes in iOS 6.

NetworkingNotes

The cellular fallback technology present in previous seeds has been removed as of Seed 5.

Two low-level networking APIs that used to return a MAC address now return the fixed value

02:00:00:00:00:00. The APIs in question are sysctl (NET_RT_IFLIST) and ioctl

(SIOCGIFCONF). Developers using the value of the MAC address should migrate to identifiers such

as -[UIDevice identifierForVendor]. This change afects all apps running on iOS 7.

Objective-C Runtime

Notes

Due to changes in how the isa field is implemented, *self may change during enumeration (for

example, if the container is retained).

Workaround: When implementing countByEnumeratingWithState, do not set state-

>mutationsPtr = self.

Passbook

Notes

As of iOS 7 Seed 4, Passbook has added support for the major and minor fields to better match the

rest of the iBeacon ecosystem. The new major and minor keys are independently variable optional

alongside proximityUUID (required) in each dictionary in the beacons array.

In previous versions of the iOS SDK, Passbook did not validate the back fields on passes

completely. The validation rules have not changed, but validation is now including back fields.

Please check the console log for additional logs.

As of iOS 7 Seed 3, PKPassLibraryDidCancelAddPasses is a new status code in the

PKPassLibraryAddPassesStatus enum. It signifies that the user tapped Cancel in an add-passes

alert.

Photos

Notes

Upon upgrading from an earlier seed, photo thumbnails in the Photos app will not appear for a short

while.

Safari

Fixed in Seed 5

Upgrading to iOS may reset Safari’s settings to their default values.

SecurityNotes

-[UIDevice uniqueIdentifier] is no longer accepted in submissions to the App Store. In iOS 7,

apps that are already on the store or on users’ devices that call this removed API will no longer be

returned the UDID. Instead, -[UIDevice uniqueIdentifier] will return a 40-character string

starting with FFFFFFFF, followed by the hex value of -[UIDevice identifierForVendor]. It is

important to consider how this will afect existing apps. Consider submitting updates that no

longer access the UDID.

iOS now requests user consent for apps to use audio input on all iOS 7 devices. For devices sold in

China, iOS will also request user consent for apps to use the camera hardware. The operating

system will present the consent alert when you set the category of the instantiated

AVAudioSession. The AVAudioSession categories that will present the alert are

AVAudioSessionCategoryRecord and AVAudioSessionCategoryPlayAndRecord.

If the user doesn’t allow access, the audio session data will be all zeros (silence). For devices where

camera access is requested and denied by the user, the video capture session is a black screen.

The API gethostuuid() has been removed and will not be accepted for submission to the store,

regardless of the targeted OS. For existing apps running on iOS 7, the function will return a uuid_t

representation of the vendor identifier (-[UIDevice identifierForVendor]).

Setup

Fixed in Seed 5

The setup assistant may crash when setting up a new device with an existing email address.

Siri

Notes

This seed includes development versions of new male and female Siri voices for U.S. English, French,

and German.

Social

Notes

Through iOS 6, when using TWTweetComposeViewController and SLComposeViewController

(the latter only for Twitter and Weibo, but not Facebook), if the caller supplies a

completionHandler, the supplied completionHandler is responsible for dismissing the view

controller. As of iOS 7, if the app links against the iOS 7 SDK, the view controller will dismiss itself

even if the caller supplies a completionHandler. To avoid this, the caller’s completionHandler

should not dismiss the view controller.

When using the iOS 6.1 SDK on OS X v10.8 Mountain Lion, if you use the iOS 5.0 or iOS 5.1 Legacy

SDK in iOS Simulator, you will not be able to use Twitter features: attempting to sign in to Twitter

via the Settings pane will fail, and Twitter.framework will not work correctly. If you need to test

Twitter features, you will need to choose either an iOS 6.1 or iOS 6.0 Simulator run destination, or

you can test with iOS 5.x on a device.Springboard

Notes

Active touches are no longer canceled when the user takes a screenshot.

Dynamic wallpaper is not available on iPhone 4.

Sprite Kit

Notes

+[AVPlayer playerWithPlayerItem:] returns an AVPlayer object, but the current item will return

nil if the player was created on another thread.

Stores

Fixed in Seed 5

Some iPhone 4 devices are unable to download content from the App Store and the iTunes Store.

Known Issues

App downloads can get stuck in the “Waiting” state.

Workaround: Reboot your device once or twice to resolve the issue and allow subsequent downloads

to continue.

UIKit

Notes

Before Seed 4, the snapshot API (snapshotView and

resizableSnapshotViewFromRect:withCapInsets:) would defer taking the snapshot if the view

had never been committed or had been added to the view hierarchy in the current transaction. This

behavior has changed.

Snapshots now always represent the current, committed state of the view. Attempting to snapshot

a view that has never been committed logs a message and now returns nil.

Snapshotting methods have been updated and now take an argument: afterUpdates. When set to

YES, this instructs the snapshot to wait until all pending changes to the hierarchy have been

committed. To maintain the pre-Seed 4 behavior, pass NO and the snapshot will capture what is

currently on screen. See UIView.h for more details.

When there isn’t enough room in the navigation bar layout for the full text of the back button title,

the navigation bar will substitute a generic short back title (in English, “Back”). If even that string is

too long, the bar will show the back indicator chevron with no title.

+[UIPasteboard pasteboardWithName:create:] and +[UIPasteboard

pasteboardWithUniqueName] now unique the given name to allow only those apps in the same

application group to access the pasteboard. If the developer attempts to create a pasteboard with a

name that already exists and they are not part of the same app suite, they will get their own uniqueand private pasteboard. Note that this does not afect the system provided pasteboards, general,

and find.

Starting with Seed 2, apps default to using the new view controller-based status bar management

system. To opt out of this, add a value of NO for the

UIViewControllerBasedStatusBarAppearance key to your Info.plist.

When using Auto Layout to position a UIButton, if you set the content compression resistance or

content hugging priority to minimum, the button will have ambiguous layout.

Workaround: Don’t use a content compression resistance or content hugging priority of less than

2 for UIButton.

UIScreenEdgePanGestureRecognizer allows you to perform actions in response to swipes over

the edge of the screen using the same heuristics that the system uses for its own gestures. Use this

if you have a navigation semantic of your own that doesn’t use UINavigationController but

should include this gesture (e.g., Safari).

This gesture recognizer has a property that describes the edges on which it’s active. UIRectEdge is

a new enum type that this property and -[UIViewController edgesForExtendedLayout] can

share. UIRectEdge replaces UIExtendedEdge, which will be removed. The members of both have

the same values. Use Xcode to replace all instances of “UIExtendedEdge” in your project with

“UIRectEdge”.

UIButtonTypeInfoLight, UIButtonTypeInfoDark, and UIButtonTypeDetailDisclosure

buttons all look the same.

Blurred layers are not available on iPhone 4.

Parallax is not available on iPhone 4.

Letterpress text is not available on iPhone 4.

Fixed in Seed 5

Your app’s UI may move slightly after using a media player in landscape mode.

Known Issues

Password fields are not displayed in alert views for apps in landscape (for example, Game Center

authentication or In-App Purchase). Text entry still works, though you can’t see what you are typing.

Weather

Notes

Weather conditions are not animated on iPhone 4.

WebKit

Notes

Previously, when the viewport parameters were modified, the old parameters were never discarded.

This caused the viewport parameters to be additive.

For example, if you started with width=device-width and then changed it to initial-scale=1.0, you

ended up with a computed viewport of width=device-width, initial-scale=1.0.In iOS 7, this has been addressed. Now you end up with with a computed viewport of initialscale=1.0.

Previously, when using, the

scale could be incorrect after rotation.

Now, if a user has not scaled the page explicitly, the page is restored to its initial scale. Also, the

current scale is now correctly restricted within the min-scale, max-scale bounds.

Some images for Retina display devices appear at twice the size that they should instead of being

scaled down 50%. This issue can also occur with any image to be scaled that is larger than its

container and that uses either the background-size property or the -webkit-background-size

property. This issue afects both native apps that display web content and web pages viewed in

Safari for iPhone.

The background CSS shorthand property now resets the value of the background-size property to

auto when background size is not specified. This new behavior is per the CSS spec, and the old

behavior is available only for apps linked to an SDK prior to iOS 7.0 when running on iOS 7 or later.

Workaround: Specify the background-size property or the -webkit-background-size property

after the background shorthand property in the CSS stylesheet for the web content being

displayed.

Web apps and web clips created prior to Seed 4 will not stay in folders across reboot.

Workaround: Delete the old web app or web clip and recreate it in this seed by loading the content

in Safari, tapping the Action button, and then “Add to Home Screen.”

Wi-Fi

Notes

Seed 4 and later include changes to AWDL such that technologies that use it—such as AirDrop and the

MultiPeerConnectivity APIs—will not work properly with older seeds.